Payment & Shipping Terms:
|Name:||Ozone Aging Test Chamber||Inner Chamber Size:||60*85*80cm(W*H*D)|
|Temp. Range:||RT To 80 Degrees||Humidity Range:||45%RH - 98%RH|
|Ozone Concentration:||0 To 1000PPHM Or 0 To 500ppm||Ozone Control Accuracy:||+/-10%|
|Ozone Produce Way:||Static Emissions||Sample Rotating Speed:||1 Times Per Minute|
Ozone aging Test Chamber For Auto Parts is mainly adopted for rubber products testing such as vulcanized rubber, thermoplastic rubber, cable insulation sheathing products, intermittent static tensile dynamic tensile deformation, or deformation under dynamic stretching and static stretching alternating, confined to light with constant ozone concentration in the air and constant temperature chamber exposed to detection, scheduled on the specimen occurred from the specimen surface cracking or other properties of the degree of change, resistance to ozone in order to assess the rubber aging properties.
1. The test chamber box located in the lower part of the cabinet after the overall structure of the form, the air handling system, detection and control system is located in the right side of the test chamber.
2. Studio surface air path sandwich, distribution heated humidifier, circulation fan and other means, Chambers upper layer has a balanced vent gas is continuously discharged from the test chamber has been kept in the test chamber the gas concentration balance test chamber for single door, ozone resistance silicon rubber seal.
3. test chamber has a viewing window and switch control lights.
4. touch screen smart controller located in the the equipment right front.
|Inner chamber size W×H×D(CM)||40×50×40||50×60×50||50×75×60||60×85×80||100×100×80||100×100×100|
|Exterior chamber size W×H×D(CM)||90×140×95||100×150×105||100×165×115||110×175×135||150×190×135||150×190×155|
|Testing temperature range||RT to +80℃|
|Testing humidity range||45%RH～98%RH|
|Temp.&humi. uniformity||±1.5℃;±2.5RH(RH≤75%),±4%(RH>75%) Empty load,30mins after stabilization|
|Ozone control precision||±10%|
|Ozone production mode||Electrostatic discharge|
|Sample frame speed||1 time/min|
|Material||Exterior chamber material||Cold-rolled steel with powder coating|
|Interior chamber material||SUS#304 Stainless steel|
|Insulation||PU & fiberglass|
|Ozone concentration analyzer||Imported ozone concentration analyzer|
|Ozone generator||Silent discharge ozone generator|
|System||Wind circulation||Cooling fan|
|Heating system||SUS#Stainless steel high-speed heater|
|Humidification system||Surface evaporation system|
|Refrigeration system||Imported Tecumseh compressor+Fin type evaporation+air (water) cooling condenser|
|Dehumidification system||ADP critical dew point cooling/desiccant method|
|Controlling system||Digital electronic indicator+SSR+PID|
|Other components||Vacuum glass observation window,cable port(dia.50mm),control status indicator,interior light and 2pcs of height adjustable shelves|
|Safety protection devices||Over-heat protection circuit breaker,compressor overload protection,control system overload protection,humidifying system overload protection,overload indicator lamp|
|Power supply||AC 1Y 220v;3Y 380V 60/50Hz|
|Customization service||Non-standard or special requirements are all welcome|
If you want to know more about the azone aging test chamber,please feel free to contact me.
Contact Person: Robin Wang